Description

The corn stalk feed crusher crushers the materials, which can make more full use of the residues of agricultural products and reduce the waste of materials. Two can be used to feed animals, so that they can absorb more nutrients.

low energy consumption, high working efficiency, finer crushing material.

The need for manual degree is not high, one person can complete the entire operation.

The machine is small in size, light in weight, easy to move and use. It can be operated by a single person, and the energy consumption is low when used.

can accept a variety of energy power support, such as motor, diesel engine, etc., can be used together.

The blades used for grinding are made of high quality steel to ensure the wear resistance of the blades.

The body of the crusher is made of high quality steel to improve the service life;

The machine adopts double feed automatically, which improves the working efficiency of the machine;

The hammer inside the machine is specially treated with high quality wear-resistant material to improve the performance of the parts.

The corn stalk feed crusher puts the corn stalk into the machine through the blade in the machine, the high-speed rotating moving disk, etc. under the action of the material to hit and cut, so that it is crushed. It is discharged from the machine under the action of centrifugal force and airflow movement inside the machine. Different models are also different in the method of use, the partial automatic machine does not need manual feeding when feeding, can be used for mobile, can eliminate the harvest process. The ordinary machine still needs manual feeding when it is used.

The material is crushed, which can make full use of the residues of agricultural products to reduce the waste of materials. Two can be used to feed animals, so that they can absorb more nutrients. After drying it as a fuel, its combustion efficiency can be improved. Four convenient granulation, the volume of the material is first crushed to make it easy to process the size, improve the utilization rate.

When using for the first time, read the manual first to fully understand the structure and operation process of the machine.

Use the machine in a relatively open place, the ventilation of the use place is strong, there are available fire extinguishing devices around, in the event of failure can be handled in time.

When in use, it is necessary to use and adjust in strict accordance with the instruction manual, and determine whether the screws on the parts are tightened, and let the machine idling for 3-4 minutes after starting, so that the suction system of the machine is in operation.

If an abnormal sound is emitted during use, the machine should be stopped immediately and the power supply should be disconnected and checked. Do not power off immediately after the work of the corn stalk feed crusher, so that it idles for 3-4 minutes, so that all the materials in the machine are discharged.

Model parameters:

Note: The above indicators are indicators that meet the following conditions, the raw material is corn, the moisture is not more than 14%, the volume weight is not less than 0.72t/ m³, the diameter of the mill sieve plate is 3mm, and the opening rate is not less than 33%.