Description

The two-axis paddle mixer mainly mixes powder, flake, block, small particles or more viscous materials. It is mainly used in all kinds of feed farms to fully mix the corresponding materials for the types of feed.

Mainly for powder, flake, block, small particles or more viscous materials are fully mixed. It is mainly used in all kinds of feed farms to fully mix the corresponding materials for the types of feed.

The shell of the paddle mixer is a W-shaped horizontal shell mixing chamber, a two-axis multi-paddle motor rotor, and a spray system (pipes and nozzles) at the top. It can be used for mixing a variety of light and heavy raw materials to reasonably improve the liquid atomization effect and avoid agglomeration;

unique blanking mechanism, large opening Angle, fast blanking, less residue. Good tightness, ensure no exposure;

Faster fusion and high symmetry, so that the raw material will not be interfered with purity, density and filling coefficient in the case of weightlessness and homogeneity;

Short mixing period, high mixing symmetry: usually raw materials in 45-120 seconds (according to different raw materials can be reasonable delay), mixing symmetry CV≤5%, reduce the mixing time, improve the work efficiency of the feed mill;

Large range of adjustable filling amount: it can be mixed with raw materials of different proportions and particle sizes in many industries;

Every time the machine mixes the materials, the control range of the material amount is very wide, and the materials can be fully mixed within the adjustable range;

The machine has low noise and no dust during use.

Inside the machine, there are two rotors rotating in opposite directions with a plurality of blades. When the material enters the machine, the blade drives the material to move. In the process of movement, the material will move according to the direction of the two rotors, which can be quickly and fully mixed here.

Stable and efficient: low mixing speed, soft, stable operation, no separation phenomenon; High uniformity (CV≤3-5%), short mixing time (45-60 seconds), fast discharge.

Environmental protection design: full door, W-type mixing chamber, unique sealing structure, instant discharge, less residue, no leakage, optional stainless steel design. Easy maintenance: large door structure, optional compressed air injection device, easy to clean and maintain.